Intelix Baluns 3

 


 DIGI-HD-COAX2-R

HDMI over Coax Receiver



The Intelix DIGI-HD-COAX2 is an AV transport system that allows HDMI with multi-channel audio to be distributed using a single 75Ω coaxial cable. The transmitter features selectable EDID presets to allow for stereo, 5.1, or 7.1 audio systems, and dual outputs. The receiver features a loop out to allow the signal to be daisy-chained up to 7 receivers.

The DIGI-HD-COAX2-R includes a coaxial cable receiver, mounting brackets, and a power supply.

  • 1080p up to 300 feet (92m), 1080i/720p up to 650 feet (200m)
  • Linkable up to 7 units
  • Stereo, 5.1 and 7.1 audio support
  • HDCP compliant
  • Built-in 1x2 splitter: one HDMI output, one coaxial loop output
  • 10.4 Gb/s amplifier bandwidth
  • Receiver only - requires DIGI-HD-COAX2-S

 

 

 DIGI-HD-COAX2-S

HDMI over Coax Transmitter

 

The Intelix DIGI-HD-COAX2 is an AV transport system that allows HDMI with multi-channel audio to be distributed using a single 75Ω coaxial cable. The transmitter features selectable EDID presets to allow for stereo, 5.1, or 7.1 audio systems, and dual outputs. The receiver features a loop out to allow the signal to be daisy-chained up to 7 receivers.

The DIGI-HD-COAX2-S includes a coaxial cable transmitter, mounting brackets, and a power supply.

  • 1080p up to 300 feet (92m), 1080i/720p up to 650 feet (200m)
  • Linkable up to 7 units
  • Stereo, 5.1 and 7.1 audio support
  • HDCP compliant
  • Built-in 1x2 splitter: two coaxial outputs
  • 10.4 Gb/s amplifier bandwidth
  • Transmitter only - requires DIGI-HD-COAX2-R





 ASW-WP

HDMI/VGA Auto-Switching Wallplate with HDBaseT Output 

 

The Intelix ASW-WP is a two-gang, Decora-style wall plate designed to be the primary PC interface for classrooms, boardrooms, and conference centers. It features VGA + Audio to HDMI conversion and an HDMI input. The unit will detect which input has an active video input, and switch to that input – if both inputs are active, the “last in” will be selected. There are additional contact closure inputs provided on the rear of the unit to allow third party control. RS232 control of the ASW-WP can be accomplished by connecting to the RS232 port on a compatible receiver, such as a DIGI-HD60C-R.

The ASW-WP utilizes HDBaseT technology to extend the digital output up to 60 meters away using standard Cat6 cable. This transmitter device is compatible with several Intelix HDBaseT receivers, but is designed to work primarily with the DIGI-HD60C-R. The unit features multiple EDID modes to eliminate user confusion, and incompatible video formats.

The ASW-WP can be powered from the rear panel, or by Power over Ethernet (PoE). Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. The Auto-Switching Wallplate also features a customizable power management system, which will put the unit into a low power state after no video for 30 minutes or being inactive for 3 hours by default.

The ASW-WP can be programmed to control the connected display. The display manufacturer’s RS232 commands can be entered into the ASW-WP with the use of Intelix Display Control software. This allows display power and input to be automatically controlled based on video activity, eliminating the need for a third party control system in many installations.


  • HDMI (including audio) and VGA/3.5mm Stereo input
  • HDBaseT output - 60m Max Distance
  • Automatically switches input to active video
  • RS232, Auto, and Dry Contact Closure for control of device
  • PoE (Power over Ethernet) or 5VDC local power (not included)
  • Display Control Software to control TV or projector with RS232 commands - automatically turns display on/off
  • Customizable power management system when not in use
  • Includes White faceplate kit



 DIGI-HD60C-R

HDBaseT HDMI Over Twisted Pair Receiver with power and control

 

The Intelix DIGI-HD60C extends HDMI, IR, and RS232 over a single twisted pair cable. The DIGI-HD60C supports a 1080p video signal, including HDCP 2.2 and multichannel audio, up to 60m, as well as 3D and 4K x 2K (UHD) signals up to 35m.

Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design allows the units to be powered at either the TX or RX end, and only one power supply is required. The power supply (PS-24D-25) and IR accessories (DIGIB-EMT and DIGIB-EYE) are sold separately.

    The DIGI-HD60-R is designed for use only with Intelix branded HDBaseT products and other HDBaseT products which conform to the reference circuit design. The power circuit may not be compatible with other HDBaseT devices and may damage them.
  • HDMI transmission up to 195 feet (60m)
  • 1080p, 4Kx2K (UHD) & 3D compatible
  • CEC supported
  • Built-in surge protection
  • Diagnostic LEDs
  • HDCP 2.2 compliant
  • Bidirectional Wideband IR and RS232 passthrough
  • PoE (Power over Ethernet) - power from RX (PS not included) when used with DIGI-HD60C-S
  • Locking Power Connector



 DIGI-HD60C-S

HDBaseT HDMI Over Twisted Pair Transmitter with power and control

 

The Intelix DIGI-HD60C extends HDMI, IR, and RS232 over a single twisted pair cable. The DIGI-HD60C supports a 1080p video signal, including HDCP 2.2 and multichannel audio, up to 60m, as well as 3D and 4K x 2K signals up to 35m.

Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design allows the units to be powered at either the TX or RX end, and only one power supply is required. The power supply (PS-24D-25) and IR accessories (DIGIB-EMT and DIGIB-EYE) are sold separately.

    The DIGI-HD60-S is designed for use only with Intelix branded HDBaseT products and other HDBaseT products which conform to the reference circuit design. The power circuit may not be compatible with other HDBaseT devices and may damage them.
  • HDMI transmission up to 195 feet (60m)
  • 1080p, 4Kx2K (UHD) & 3D compatible
  • CEC supported
  • Built-in surge protection
  • Diagnostic LEDs
  • HDCP 2.2 compliant
  • Bidirectional Wideband IR and RS232 passthrough
  • PoE (Power over Ethernet) - power from RX (PS not included) when used with DIGI-HD60C-R
  • Locking Power Connector



 DIGI-HD70-R-B HDBASET HDMI VIDEO & AUDIO EXTENDER - RECEIVER

 


  • Extends 1080p and multichannel audio signals up to 70 meters (229 feet)
  • 3D and 4K x 2K up to 40 meters (131 feet)
  • EDID pass through makes for a simple and easy installation
  • Supports Consumer Electronics Control
  • Supports HDBaseT Specifications; HDMI and HDCP compliance
  • Receiver only - compatible transmitter required

  • Applications

  • Extend HDMI up to 70 meters
  • Digital signage, restaurant and bar, commercial video systems
  • Supports plenum, outdoor cable formats


  •  DIGI-HD70-S

    HDBaseT HDMI Video & Audio Extender - Transmitter

     

    The Intelix DIGI-HD70 extends HDMI over a single twisted pair cable. The DIGI-HD70 supports a 1080p video signal up to 70m, as well as 3D and 4K x 2K signals up to 40m.

    Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. The DIGI-HD70 incorporates HDBaseT technology.


    • Extends 1080p and multichannel audio signals up to 70 meters (229 feet)
    • 3D and 4K x 2K up to 40 meters (131 feet)
    • EDID pass through makes for a simple and easy installation
    • Supports Consumer Electronics Control
    • Supports HDBaseT Specifications; HDMI and HDCP compliance
    • Transmitter only - compatible receiver required



     DIGI-HDE-R-B

    HDBaseT HDMI, Ethernet, RS232 & Bi-Directional IR Extender - Receiver

     

    The Intelix DIGI-HDE extends HDMI, Ethernet, bi-directional IR and bi-directional RS232 over a single twisted pair cable. The DIGI-HDE supports 1080p, 2k, 4k, and 3D video up to 100m.

    Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. The DIGI-HDE incorporates HDBaseT technology.


    • Up to 100m (328 ft.) extension of HDMI multimedia, 100BaseT ethernet, bi-directional IR and RS232
    • Supports 3D, 4K x 2K, most audio formats up to 7.1 channel audio
    • EDID pass through makes for a simple and easy installation
    • Supports Consumer Electronics Control
    • Supports HDBaseT Specifications; HDMI and HDCP compliance
    • Receiver only - compatible transmitter required


     DIGI-HDE-S HDBaseT HDMI, Ethernet, RS232 & Bi-Directional IR Extender -

     

     

    The Intelix DIGI-HDE extends HDMI, Ethernet, bi-directional IR and bi-directional RS232 over a single twisted pair cable. The DIGI-HDE supports 1080p, 2k, 4k, and 3D video up to 100m.

    Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. The DIGI-HDE incorporates HDBaseT technology.


    • Up to 100m (328 ft.) extension of HDMI multimedia, 100BaseT ethernet, bi-directional IR and RS232
    • Supports 3D, 4K x 2K, most audio formats up to 7.1 channel audio
    • EDID pass through makes for a simple and easy installation
    • Supports Consumer Electronics Control
    • Supports HDBaseT Specifications; HDMI and HDCP compliance
    • Transmitter only - compatible receiver required




     DIGI-HD-IR3-R 

    HDMI & IR OVER TWISTED-PAIR EXTENDER - RECEIVER

     



  • HDMI and IR over twisted pair extender
  • Bi-directional wideband IR
  • 1080p up to 150 feet (45m)
  • 1080i/720p up to 300 feet (92m)
  • Built-in surge protection
  • Configurable EDID
  • HDCP compliant


  •   DIGI-HD-IR3-S

    HDMI & IR Over Twisted-Pair Extender - Transmitter

     

    Based on the Intelix’s award-winning DIGI-HD-IR2, the DIGI-HD-IR3 -S is a professional-grade extender which transmits HDMI and bi-directional, wideband IR up to 300 feet over two twisted pair cables.

    Ideal for residential AV, commercial AV, and digital signage applications, the DIGI-HD-IR3-S transmits 1080p video up to 150 feet, 720p and 1080i video up to 300 feet, and 480i and 480p video up to 300 feet. Built-in buffering and amplification allow multiple units to be linked for greater distances, and ESD protection safeguards connected equipment from power strikes and surges.

    The DIGI-HD-IR3-S employs Intelix HDshāk processing, which delivers the highest level of EDID and DDC negotiation, ensuring proper source and destination HDCP handshaking even over extended distances of twisted pair cabling. Features include dynamic EDID transfer and bandwidth limiting circuitry.

    The DIGI-HD-IR3-S includes a twisted pair transmitter, IR receiver (IR eye), IR emitter, and a power supply. 

      NOTE: This product features TMDS extender reclocking technology and may require manual setup of the extender or connected devices, including direct access to the display during setup and/or operation. Intelix recommends utilizing HDBaseT technology to reduce installation time.
    • Extends HDMI and bi-directional wideband IR up to 300 feet (720p/1080i)
    • 1080p up to 150 feet with shielded Cat6A
    • Built-in surge protection
    • Configurable EDID
    • HDMI and HDCP compliant
    • Transmitter only - compatible receiver required


     DIGI-HD-IR3-WP-R

    HDMI & Bi-Directional IR Wall Plate Extender - Receiver

    Based on the Intelix’s award-winning DIGI-HD-IR2, the DIGI-HD-IR3-WP-R is a professional-grade wall plate extender which receives HDMI and bi-directional, wideband IR up to 300 feet over two twisted pair cables.

    Ideal for residential AV, commercial AV, and digital signage applications, the DIGI-HD-IR3-WP-R receives 1080p video up to 150 feet, 720p and 1080i video up to 300 feet, and 480i and 480p video up to 300 feet when paired with a compatible transmitter. Built-in buffering and amplification allow multiple units to be linked for greater distances, and ESD protection safeguards connected equipment from power strikes and surges.

    The DIGI-HD-IR3-WP-R employs Intelix HDshāk processing, which delivers the highest level of EDID and DDC negotiation, ensuring proper source and destination HDCP handshaking even over extended distances of twisted pair cabling.

    The DIGI-HD-IR3-WP-R includes a twisted pair receiver, IR receiver (IR eye), IR emitter, and a power supply. The unit may be powered from the front via a barrel connector, or on the rear with a screw down connector.

      NOTE: This product features TMDS extender reclocking technology and may require manual setup of the extender or connected devices, including direct access to the display during setup and/or operation. Intelix recommends utilizing HDBaseT technology to reduce installation time.
    • Extends HDMI and bi-directional wideband IR up to 300 feet (720p/1080i)
    • 1080p up to 150 feet with shielded Cat6A
    • Built-in surge protection
    • Configurable EDID
    • HDMI and HDCP compliant
    • Receiver only - compatible transmitter required


     DIGI-HD-IR3-WP-S

    HDMI & Bi-Directional IR Wall Plate Extender - Transmitter

     

    Based on the Intelix’s award-winning DIGI-HD-IR2, the DIGI-HD-IR3 –WP-S is a professional-grade wall plate extender which transmits HDMI and bi-directional, wideband IR up to 300 feet over two twisted pair cables.

    Ideal for residential AV, commercial AV, and digital signage applications, the DIGI-HD-IR3-WP-S transmits 1080p video up to 150 feet, 720p and 1080i video up to 300 feet, and 480i and 480p video up to 300 feet. Built-in buffering and amplification allow multiple units to be linked for greater distances, and ESD protection safeguards connected equipment from power strikes and surges.

    The DIGI-HD-IR3-WP-S employs Intelix HDshāk processing, which delivers the highest level of EDID and DDC negotiation, ensuring proper source and destination HDCP handshaking even over extended distances of twisted pair cabling. Features include dynamic EDID transfer, built-in EDID tables, customizable EDID storing, and bandwidth limiting circuitry.

    The DIGI-HD-IR3-WP-S includes a twisted pair transmitter, IR receiver (IR eye), IR emitter, and a power supply. The unit may be powered from the front via a barrel connector, or on the rear with a screw down connector.

      NOTE: This product features TMDS extender reclocking technology and may require manual setup of the extender or connected devices, including direct access to the display during setup and/or operation. Intelix recommends utilizing HDBaseT technology to reduce installation time.
    • Extends HDMI and bi-directional wideband IR up to 300 feet (720p/1080i)
    • 1080p up to 150 feet with shielded Cat6A
    • Built-in surge protection
    • Configurable EDID
    • HDMI and HDCP compliant
    • Transmitter only - compatible receiver required


     DIGI-HDMI-HR

    HDMI over Twisted-Pair Extender Set

    

    • HDMI to dual RJ45 connectivity
    • HDMI and HDCP compliant
    • Supports 1080i, 720p, 576i/p, 480i/p
    • Powered on either the send or receive unit
    • Complete set, TX, RX, power supplies, manual

     

    Applications

    • Extend 1080i/720p up to 150 feet
    • Ideal for corporate facilities, churches, schools, and conference centers

     

     DL-HDCAT-INT-R

    Liberty DigitaLinx Twin Category Cable HDMI 1.4 Receiver with International power adapter kit


    This Digitalinx™ Digital Media Converter is an externally powered digital HDMI and DVI Media Converter system to send HDMI and DVI over standard Category Cable, unshielded or shielded. The unit uses an included 5 VDC power source. The unit supports Audio Return Channel (ARC), Ethernet, 3D, Deep Color, and CEC protocols with an increased bandwidth to 2.25 Gbps per TMDS channel for a total throughput of 6.75 Gbps. This unit supports DVI applications.

    This Digital Media Converter is ideal for installations where pre-wire has been done with multiple category cables or where space constraints limit installing HDMI® or DVI cables. The Category cable solution is also excellent for retrofit applications. The compact design allows the devices to be unobtrusive in the final installation. It is recommended to test an application using the customer equipment as the signal from the source device varies between manufacturers.

    The system can easily accommodate DVI only inputs and outputs by using Liberty’s high quality HDMI to DVI interconnects. The DVI connector is routed to the sources and display unit while the HDMI connector plugs into the Digitalinx™ Digital Media Converter. The digital audio signal is not transmitted when using DVI connectors.

     

    • HDMI 1.4, Simplay Certified
    • Supports 6.75 Gbps 1080p60 deep Color, 3D, ARC, Ethernet
    • Supports All Audio formats
    • Recommend Category 6 Overall Shielded TWP Cables
    • 50m (165 feet) 1080p on Category 6
    • 30m (100 feet) 1080p of Category 5e
    • Package includes RX unit, DC Power Supply, Manual
    • Includes Power Supply Adapters for EU/UK/Asia/US

     

    DL-HDCAT-INT-S

    Liberty DigitaLinx Twin Category Cable HDMI 1.4 Transmitter for International use


    This Digitalinx™ Digital Media Converter is an externally powered digital HDMI and DVI Media Converter system to send HDMI and DVI over standard Category Cable, unshielded or shielded. The unit uses an included 5 VDC power source. The unit supports Audio Return Channel (ARC), Ethernet, 3D, Deep Color, and CEC protocols with an increased bandwidth to 2.25 Gbps per TMDS channel for a total throughput of 6.75 Gbps. This unit supports DVI applications.

    This Digital Media Converter is ideal for installations where pre-wire has been done with multiple category cables or where space constraints limit installing HDMI® or DVI cables. The Category cable solution is also excellent for retrofit applications. The compact design allows the devices to be unobtrusive in the final installation. It is recommended to test an application using the customer equipment as the signal from the source device varies between manufacturers.

    The system can easily accommodate DVI only inputs and outputs by using Liberty’s high quality HDMI to DVI interconnects. The DVI connector is routed to the sources and display unit while the HDMI connector plugs into the Digitalinx™ Digital Media Converter. The digital audio signal is not transmitted when using DVI connectors.

     

    • HDMI 1.4, Simplay Certified
    • Supports 6.75 Gbps 1080p60 deep Color, 3D, ARC, Ethernet
    • Supports All Audio formats
    • Recommend Category 6 Overall Shielded TWP Cables
    • 50m (165 feet) 1080p on Category 6
    • 30m (100 feet) 1080p of Category 5e
    • Package includes TX unit only

    Applications
    • Extension of HDMI/DVI signals
    • Plenum longer distance HDMI/DVI Extension
    • Small space issues where TWP can be run but not HDMI

    

     

     

    


    SKYPLAY-MX-R

    Pro Wireless HDMI Receiver

    The Intelix SKYPLAY-MX improves upon the existing wireless HDMI by ensuring source to destination compatibility with full HDCP-compliance. The SKYPLAY-MX wireless distribution is designed specifically for professional grade audio-visual installations.

    The SKYPLAY-MX distributes HDMI high-definition audio and video up to 100 feet in both point-to-point point-to-many, and many-to-point configurations. Each transmitter is compatible with up to 4 receivers and each receiver can be paired to switch up to 4 transmitters.

    Amimon Pro transmission and AES 128-bit encrypted processing ensure the integrity of digital signals and real-time processing (less than one frame), whether transmitting in open spaces or through light construction, such as framed drywall walls.


    • Wirelessly distribute HDMI up to 100 feet
    • IR control of source
    • Signals can go through standard sheet rock walls
    • Addressable transmitters
    • Up to 4 transmitters per receiver
    • Less than 1 frame latency (17 milliseconds)
    • HDCP 2.0 compliant, dynamic EDID passthrough, multichannel audio support


    SKYPLAY-MX-S

    Pro Wireless HDMI Transmitter

    The Intelix SKYPLAY-MX improves upon the existing wireless HDMI by ensuring source to destination compatibility with full HDCP-compliance. The SKYPLAY-MX wireless distribution is designed specifically for professional grade audio-visual installations.

    The SKYPLAY-MX distributes HDMI high-definition audio and video up to 100 feet in both point-to-point point-to-many, and many-to-point configurations. Each transmitter is compatible with up to 4 receivers and each receiver can be paired to switch up to 4 transmitters.

    Amimon Pro transmission and AES 128-bit encrypted processing ensure the integrity of digital signals and real-time processing (less than one frame), whether transmitting in open spaces or through light construction, such as framed drywall walls.

    Features and Benefits
    • Wirelessly distribute HDMI up to 100 feet
    • IR control of source
    • Signals can go through standard sheet rock walls
    • Addressable transmitters
    • Up to 4 receivers per transmitter
    • Less than 1 frame latency (17 milliseconds)
    • HDCP 2.0 compliant, dynamic EDID passthrough, multichannel audio support


    BACK