Intelix Baluns 6

 

 

AVO-USB-C

Full-Speed USB Extender Dongle - Client Side

The AVO-USB-C extenders transmit low speed USB 1.0, 1.1, and 2.0 signals up to 330 feet, and full speed USB 1.0, 1.1, and 2.0 signals up to 100 feet over twisted pair cabling. The AVO-USB-C is installed at a remote location to connect peripherals to a host device.

The AVO-USB-C is plug-and-play, does not require driver software, and uses the same USB circuit as our other USB bus power devices for installation flexibility.

 

  • USB 2.0 full speed 12Mbps, USB 1.1 legacy support
  • Up to 330 feet cable lengths on U/UTP category 5/5e/6
  • Not for USB 2.0 high speed
  • No external power required, uses host device's 5V power
  • USB "A" female (client) to RJ45 jack connectivity
  • Requires compatible host end.
Applications
  • Uses any Cat5/5e/6/6A twisted pair cabling
  • Extension of USB 1.1 and 2.0 full speed signals
  • Plenum routing of USB 1.1 and 2.0 full speed
  • Ideal for education, government, house of worship, corporate, residential, and any other application requiring extended USB signal distribution

 

 

 AVO-USB-H

Full-Speed USB Extender Dongle - Host Side

The AVO-USB-H extenders transmit low speed USB 1.0, 1.1, and 2.0 signals up to 330 feet, and full speed USB 1.0, 1.1, and 2.0 signals up to 100 feet over twisted pair cabling. The AVO-USB-H is installed at a host location to connect peripherals from a remote client side extender.

The AVO-USB-H is plug-and-play, does not require driver software, and uses the same USB circuit as our other USB bus power devices for installation flexibility.

 

  • USB 2.0 full speed 12Mbps, USB 1.1 legacy support
  • Up to 330 feet cable lengths on U/UTP category 5/5e/6
  • Not for USB 2.0 high speed
  • No external power required, uses host device's 5V power
  • USB "A" male (host) to RJ45 jack connectivity
  • Requires compatible client end.

Applications
  • Uses any Cat5/5e/6/6A twisted pair cabling
  • Extension of USB 1.1 and 2.0 full speed signals
  • Plenum routing of USB 1.1 and 2.0 full speed
  • Ideal for education, government, house of worship, corporate, residential, and any other application requiring extended USB signal distribution

 

 

 DIGI-USB2

USB 2.0 Extender Set

The Intelix DIGI-USB2 extends computer USB 1.1 and USB 2.0 signals up to 100m (330) over twisted pair cabling.  The device can be powered at either the client or host device.

 

  • Extends USB High-Speed (480 Mbps) up to 100 m (330 ft)
  • Can be powered at either the client or host device
  • Uses any Cat5e/6/6A twisted pair cabling
  • Supplies 500mA to USB devices
  • Can also be used to extend USB 1.1 signals

Applications

  • Great for extending high-bandwidth USB devices, such as HD webcams and motion-controlled gaming devices
  • Plenum routing of USB 1.1 and 2.0 full speed
  • Ideal for education, government, house of worship, corporate, residential, and any other application requiring extended USB signal distribution

 

 

USB-WP-C-A

Full-Speed USB Extender Wall Plate - Client Side

The Intelix USB-WP-C-series extenders transmit low speed USB 1.0, 1.1, and 2.0 signals up to 330 feet, and full speed USB 1.0, 1.1, and 2.0 signals up to 100 feet over twisted pair cabling. The USB-WP-C is installed at a remote location to connect peripherals to a host device.

Decora inserts allow installation in any setting, facilitating a clean low-profile installation in four popular colors: almond, ivory, white, and black.

The Intelix USB-WP-C is plug-and-play, does not require driver software, and uses the same USB circuit as our other USB bus power devices for installation flexibility.

 

  • USB 2.0 full speed 12Mbps, USB 1.1 legacy support
  • Up to 330 feet cable lengths on U/UTP category 5/5e/6
  • Not for USB 2.0 high speed
  • No external power required, uses host device's 5V power
  • USB "A" female (client) to RJ45 jack connectivity
  • White Decora insert with matching surround
  • Available in almond, black, ivory, and white
  • Requires compatible host end.

 

 USB-WP-H-A

Full-Speed USB Extender Wall Plate (Almond) - Host Side

The Intelix USB-WP-H-series extenders transmit low speed USB 1.0, 1.1, and 2.0 signals up to 330 feet, and full speed USB 1.0, 1.1, and 2.0 signals up to 100 feet over twisted pair cabling. The USB-WP-H is installed at a host location to connect peripherals from a remote client side extender.

Decora inserts allow installation in any setting, facilitating a clean low-profile installation in four popular colors: almond, ivory, white, and black.

The Intelix USB-WP-H is plug-and-play, does not require driver software, and uses the same USB circuit as our other USB bus power devices for installation flexibility.

 

  • USB 2.0 full speed 12Mbps, USB 1.1 legacy support
  • Up to 330 feet cable lengths on U/UTP category 5/5e/6
  • Not for USB 2.0 high speed
  • No external power required, uses host device's 5V power
  • USB B" female (host) to RJ45 jack connectivity
  • Almond Decora insert with matching surround
  • Available in almond, black, ivory, and white
  • Requires compatible client end.

 

BACK