Extender / Balun

 

 

VGA -Series

 

 

ASW-WP

HDMI/VGA Auto-Switching Wallplate with HDBaseT Output

The Intelix ASW-WP is a two-gang, Decora-style wall plate designed to be the primary PC interface for classrooms, boardrooms, and conference centers. It features VGA + Audio to HDMI conversion and an HDMI input. The unit will detect which input has an active video input, and switch to that input – if both inputs are active, the “last in” will be selected. There are additional contact closure inputs provided on the rear of the unit to allow third party control.  RS232 control of the ASW-WP can be accomplished by connecting to the RS232 port on a compatible receiver, such as a DIGI-HD60C-R.

The ASW-WP utilizes HDBaseT technology to extend the digital output up to 60 meters away using standard Cat6 cable. This transmitter device is compatible with several Intelix HDBaseT receivers, but is designed to work primarily with the DIGI-HD60C-R. The unit features multiple EDID modes to eliminate user confusion, and incompatible video formats.

The ASW-WP can be powered from the rear panel, or by Power over Ethernet (PoE). Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. The Auto-Switching Wallplate also features a customizable power management system, which will put the unit into a low power state after no video for 30 minutes or being inactive for 3 hours by default.

The ASW-WP can be programmed to control the connected display.  The display manufacturer’s RS232 commands can be entered into the ASW-WP with the use of Intelix Display Control software.  This allows display power and input to be automatically controlled based on video activity, eliminating the need for a third party control system in many installations.

 

  • HDMI (including audio) and VGA/3.5mm Stereo input
  • HDBaseT output - 60m Max Distance
  • Automatically switches input to active video
  • RS232, Auto, and Dry Contact Closure for control of device
  • PoE (Power over Ethernet) or 5VDC local power (not included)
  • Display Control Software to control TV or projector with RS232 commands - automatically turns display on/off
  • Customizable power management system when not in use
  • Includes White faceplate kit

 

 

AVO-VGA

P

assive VGA Balun Set

The Intelix AVO-VGA balun set passively transmits VGA video over standard unshielded twisted pair cable, such as Cat 5, Cat 5e or Cat 6. The AVO-VGA eliminates the need for costly and bulky VGA cable, and extends video transmission distances.

 

  • One VGA to one RJ45 connectivity
  • Transmits/receives one VGA video signal
  • Up to 200 feet cable lengths on U/UTP category 5/5e/6
  • This is a complete kit, which includes a transmitter and receiver
  • Bandwidth: DC to 60 MHz

Applications

  • Ideal for corporate facilities, churches, schools, auditoriums and almost any other situation involving VGA video signal distribution
  • Long distance routing of VGA video over structured cabling such as Cat5
  • Used in pairs, these baluns replace bulky coax cable and utilize a building's existing structured cabling network

 

 

VGA2-HR

High Resolution VGA over Twisted-Pair Extender

The Intelix VGA2-HR extends a computer video signal over a single twisted pair cable. The VGA2-HR supports computer video resolutions up to UXGA (1600 x 1200) to a maximum distance of 106 m (350 ft).

Dipswitches on the Transmit balun allow for Built-in EDID presets of common resolutions (1024x768 and 1280x800) and EDID copy mode.  In EDID copy mode the Receive balun transmits the EDID of the remote display back to the Transmit balun for custom EDID storage.

The Receive balun has DIP switches for skew compensation as well as a trim pot for brightness.

 

  • Extends a computer video signal (maximum of 1600x1200) up to 350 feet
  • Dipswitch controlled adjustable color skew equalization
  • Built-in EDID presets for common resolutions (1024x768 and 1280x800 @ 60 Hz)
  • EDID copy feature stores destination device's EDID information onto the VGA2-HR transmitter
  • Includes transmitter, receiver, and power supply

 

 

VGA2-UHR

Ultra High Resolution VGA over Twisted-Pair Extender

The Intelix VGA2-UHR extends a computer video signal over a single twisted pair cable. The VGA2-HR supports computer video resolutions up to WUXGA (1920 x 1200) to a maximum distance of 168m (550 ft).

Dipswitches on the Transmit balun allow for Built-in EDID presets of common resolutions (1024x768 and 1280x800) and EDID copy mode.  In EDID copy mode the Receive balun transmits the EDID of the remote display back to the Transmit balun for custom EDID storage.

The Receive balun has trim pots for skew compensation and brightness.

 

  • Extends a computer video signal (maximum of 1920x1200) up to 550 feet
  • Dipswitch controlled adjustable color skew equalization
  • Built-in EDID presets for common resolutions (1024x768 and 1280x800 @ 60 Hz)
  • EDID copy feature stores destination device's EDID information onto the VGA2-HR transmitter
  • Includes transmitter, receiver, and power supply

 

 

BACK