Intelix DA's



 


 AVDA-8-F

Distribution Amp for Avo Cat Series Baluns - 1 Input x 8 Output

The Intelix AVDA-8-F distribution amplifier balun distributes a single audio and video source to eight destinations (linkable up to 64 total destinations). The Intelix AVDA-8-F is compatible with Intelix composite video, s-video, and stereo audio baluns.


Features and Benefits

  • Distributes a single source to eight destinations
  • Linkable up to 64 total destinations
  • Compatible with the Intelix AvoCat Series composite video, s-video, and analogue audio extenders


 


 DIGI-1x4B-1H

Distribution Amp - 1 HDMI Input to 4 HDBaseT Output Plus 1 HDMI Output


The Intelix DIGI-1X4B-1H is an HDMI distribution amp with four HDBaseT outputs and one HDMI Loop output. The Intelix DIGI-1X4B-1H is designed for any system that requires an HDMI signal to be distributed to multiple remote locations.

The Intelix DIGI-1X4B-1H features HDBaseT twisted pair extension for four outputs, allowing the same signal to be routed to a remote destination with an HDBaseT receiver. The HDBaseT ports support up to 4Kx2K HDMI video with audio, wide-band IR tunneling (for IR control of source or displays), RS232 tunneling, and HDCP up to 60 meters (196 feet). Each HDBaseT output port supplies power to the attached extender, eliminating the need for a power supply at the display end.

The Intelix DIGI-1X4B-1H is designed with an HDMI loop out which is intended to cascade to additional units, allowing for system expansion for larger systems. A unique control design allows the RS232 port to be addressed and cascaded, allowing control commands to be discretely directed to the RS232 port of any attached HDBaseT receiver. This design allows third party control systems to reduce the number of COM ports required, thus reducing hardware costs.

The Intelix DIGI-1X4B-1H is HDMI compatible and supports up to 4kx2k resolutions, Deep Colour, and full 3D capabilities. The DA features advanced EDID and HDCP handling, including EDID copy and preset modes.


  • One HDMI input
  • Four HDBaseT outputs (up to 60 m [195 ft]) with PoE and control
  • One HDMI output for confidence monitor or cascading
  • Cascade 10 units together for total output of 40
  • 1080p, 4Kx2K compatible; HDCP compliant
  • Diagnostic LEDs; built-in surge protection
  • Bidirectional Wideband IR and RS232 routing for discrete display control
  • Includes international power supply with locking connector

 DIGI-HD-COAX2-R

HDMI over Coax Receiver

The Intelix DIGI-HD-COAX2 is an AV transport system that allows HDMI with multi-channel audio to be distributed using a single 75Ω coaxial cable. The transmitter features selectable EDID presets to allow for stereo, 5.1, or 7.1 audio systems, and dual outputs. The receiver features a loop out to allow the signal to be daisy-chained up to 7 receivers.

The DIGI-HD-COAX2-R includes a coaxial cable receiver, mounting brackets, and a power supply.


  • 1080p up to 300 feet (92m), 1080i/720p up to 650 feet (200m)
  • Linkable up to 7 units
  • Stereo, 5.1 and 7.1 audio support
  • HDCP compliant
  • Built-in 1x2 splitter: one HDMI output, one coaxial loop output
  • 10.4 Gb/s amplifier bandwidth
  • Receiver only - requires DIGI-HD-COAX2-S



 DIGI-HD-COAX2-S

HDMI over Coax Transmitter

 

The Intelix DIGI-HD-COAX2 is an AV transport system that allows HDMI with multi-channel audio to be distributed using a single 75Ω coaxial cable. The transmitter features selectable EDID presets to allow for stereo, 5.1, or 7.1 audio systems, and dual outputs. The receiver features a loop out to allow the signal to be daisy-chained up to 7 receivers.

The DIGI-HD-COAX2-S includes a coaxial cable transmitter, mounting brackets, and a power supply.


  • 1080p up to 300 feet (92m), 1080i/720p up to 650 feet (200m)
  • Linkable up to 7 units
  • Stereo, 5.1 and 7.1 audio support
  • HDCP compliant
  • Built-in 1x2 splitter: two coaxial outputs
  • 10.4 Gb/s amplifier bandwidth
  • Transmitter only - requires DIGI-HD-COAX2-R



 SKYPLAY-DFS-R

Wireless HDMI Distribution System with Dynamic Frequency Selection - Receiver

 

The SKYPLAY-DFS distributes HDMI high-definition audio and video up to 30 meters (100 feet) in both point-to-point, point-to-many, and many-to-point configurations. Each transmitter is compatible with up to 4 receivers and each receiver can be paired to switch up to 4 transmitters.

The SKYPLAY-DFS-S can transmit 1080p video with stereo or multichannel audio. The SKYPLAY-DFS-R can transmit IR signals from the remote location to control the source device. The SKYPLAY-DFS transmitter and receiver must be paired together to pass video.

The SKYPLAY-DFS radios are configured for US and Canada operation.


  • Wirelessly distribute HDMI up to 100 feet; IR control of source
  • Signals can go through standard sheet rock walls
  • Up to 4 receivers per transmitter
  • Less than 1 frame latency (17 milliseconds)
  • HDCP 2.0 compliant, dynamic EDID pass through, multichannel audio support
  • DFS (Dynamic Frequency Selection) for improved density and reliability

 


 SKYPLAY-DFS-S

Wireless HDMI Distribution System with Dynamic Frequency Selection - Transmitter


The SKYPLAY-DFS distributes HDMI high-definition audio and video up to 30 meters (100 feet) in both point-to-point, point-to-many, and many-to-point configurations. Each transmitter is compatible with up to 4 receivers and each receiver can be paired to switch up to 4 transmitters.

The SKYPLAY-DFS-S can transmit 1080p video with stereo or multichannel audio. The SKYPLAY-DFS-R can transmit IR signals from the remote location to control the source device. The SKYPLAY-DFS transmitter and receiver must be paired together to pass video.

The SKYPLAY-DFS radios are configured for US and Canada operation.


  • Wirelessly distribute HDMI up to 100 feet; IR control of source
  • Signals can go through standard sheet rock walls
  • Up to 4 receivers per transmitter
  • Less than 1 frame latency (17 milliseconds)
  • HDCP 2.0 compliant, dynamic EDID pass through, multichannel audio support
  • DFS (Dynamic Frequency Selection) for improved density and reliability

 

 DL-DA12

HDMI Distribution Amp with 4k Support - 1 Input x 2 Output

 

The Digitalinx DL-DA12 is a one input to two output HDMI distribution amplifier (DA). The DL-DA12 supports 3D and 4K video resolutions as well as multichannel audio formats. The EDID settings of the display on Output 1 are used to negotiate with the source device.


  • HDMI v1.4, HDCP 1.1 and DVI 1.0 Compliant
  • Allows distribution of 2 Outputs
  • Locking power connector
  • Supports 3D, 4Kx2K, and Deep Colour
  • Automatic Discovery of Monitor EDID


 DL-DA14

HDMI Distribution Amp with 4k Support - 1 Input x 4 Output

 

The Digitalinx DL-DA14 is a one input to four output HDMI distribution amplifier (DA). The DL-DA14 supports 3D and 4K video resolutions as well as multichannel audio formats.

The EDID settings for the DL-DA14, either 1080p with stereo audio or the EDID of the display on Output 1, are configured by a switch on the rear of the DA. The DL-DA14 features diagnostic LEDs on the front of the product indicating the state of the connections into and out of the unit. The CEC switch on the rear of the DA will send a switch to input 1 command to displays that support CEC if the switch is activated.


  • HDMI v1.4, HDCP 1.1 and DVI 1.0 Compliant
  • Allows distribution of 4 Outputs
  • Locking power connector
  • Supports 3D, 4Kx2K, and Deep Colour
  • Automatic Discovery of Monitor EDID

 


 DL-DA18

HDMI Distribution Amp with 4k Support - 1 Input x 8 Output

 

The Digitalinx DL-DA18 is a one input to eight output HDMI distribution amplifier (DA). The DL-DA18 supports 3D and 4K video resolutions as well as multichannel audio formats.

The EDID settings for the DL-DA18, either 1080p with stereo audio or the EDID of the display on Output 1, are configured by a switch on the rear of the DA. The DL-DA18 features diagnostic LEDs on the front of the product indicating the state of the connections into and out of the unit. The CEC switch on the rear of the DA will send a switch to input 1 command to displays that support CEC if the switch is activated.


  • HDMI v1.4, HDCP 1.1 and DVI 1.0 Compliant
  • Allows distribution of 8 Outputs
  • Locking power connector
  • Supports 3D, 4Kx2K, and Deep Colour
  • Automatic Discovery of Monitor EDID




 DIGI-VGA-F

VGA over Twisted-Pair Extender & Distribution Amp

 

 

The Intelix DIGI-VGA-F transmits computer video and stereo audio over a single twisted pair cable, such as Cat 5e or Cat 6.

The DIGI-VGA-F features local computer video and stereo audio output. Additionally, Video and Audio status LEDs indicate signal presence on the transmitter and the receiver.

The DIGI-VGA-F features up to 1920x1200 computer video performance and high-fidelity 20Hz to 20kHz audio performance extension up to 350 feet.


  • RGBHV video up to 1920x1200 at 250 feet down to 800x600 at 850 feet (Cat 6)
  • Local output on send balun for added versatility
  • Receive balun features dual amplified audio/video outputs for signal distribution
  • Brightness and contrast picture quality controls
  • Sold as a send/receive pair with power supplies



 DIGI-VGASD2-R

VGA, IR & RS232 over Twisted-Pair Receiver

 

The Intelix DIGI-VGASD2-R receives computer video, stereo audio, and control signals over a single twisted pair cable, such as Cat 5e or Cat 6.

The DIGI-VGASD2-R features dual amplified outputs and adjustable video equalization.

The DIGI-VGASD2-R features up to 1920x1200 computer video performance and high-fidelity 20Hz to 20kHz audio performance extension up to 350 feet. The DIGI-VGASD2-R features bi-directional IR and RS232 extension up to 350 feet.


  • Receives computer video, stereo audio, and control signals over a single twisted pair cable, such as Cat 5e or Cat 6
  • Dual amplified outputs and adjustable video equalization
  • Can pass resolutions up to 1920x1200 and 20 Hz to 20 kHz audio up to 350 feet
  • Bi-directional IR and RS232 extension up to 350 feet
  • Receiver only - compatible transmitter required



 DIGI-VGASD2-T4

VGA, IR & RS232 over Twisted-Pair Distribution Amp

 

The Intelix DIGI-VGASD2-T4 transmits computer video, stereo audio, and control signals to eight remote destinations over a single twisted pair cable, such as Cat 5e or Cat 6.

The DIGI-VGASD2-T4 features local computer video and stereo audio output.

The DIGI-VGASD2-T4 features built in EDID tables that emulate common resolutions (1024x768 and 1280x800). The DIGI-VGASD2-T4 features an EDID copy function that will copy all EDID information from the destination device. The DIGI-VGASD2-T8 will retain the copied EDID information if power is disconnected.

The DIGI-VGASD2-T4 features up to 1920x1200 computer video performance and high-fidelity 20Hz to 20kHz audio performance extension up to 350 feet. The DIGI-VGASD2-T4 features bi-directional IR and RS232 on Output 1, and uni-directional (transmitter to receiver) IR and RS232 on all other outputs.


  • Transmits computer video, stereo audio, and control signals to four remote destinations over twisted pair cable, such as Cat 5e or Cat 6
  • Local VGA and stereo audio outputs
  • EDID copy feature stores destination device's EDID information onto DIGI-VGASD2-S
  • Can pass resolutions up to 1920x1200 and 20 Hz to 20 kHz audio up to 350 feet
  • IR and RS232 extension up to 350 feet, bi-directional IR on output 1 only
  • Transmitter only - DIGI-VGASD2-R required



 DIGI-VGASD2-T8

VGA, IR & RS232 over Twisted-Pair Distribution Amp - 8 Output

 

The Intelix DIGI-VGASD2-T8 transmits computer video, stereo audio, and control signals to eight remote destinations over a single twisted pair cable, such as Cat 5e or Cat 6.

The DIGI-VGASD2-T8 features local computer video and stereo audio output.

The DIGI-VGASD2-T8 features built in EDID tables that emulate common resolutions (1024x768 and 1280x800). The DIGI-VGASD2-T8 features an EDID copy function that will copy all EDID information from the destination device. The DIGI-VGASD2-T8 will retain the copied EDID information if power is disconnected.

The DIGI-VGASD2-T8 features up to 1920x1200 computer video performance and high-fidelity 20Hz to 20kHz audio performance extension up to 350 feet. The DIGI-VGASD2-T8 features bi-directional IR and RS232 on Output 1, and uni-directional (transmitter to receiver) IR and RS232 on all other outputs.


  • Transmits computer video, stereo audio, and control signals to eight remote destinations over twisted pair cable, such as Cat 5e or Cat 6
  • Local VGA and stereo audio outputs
  • EDID copy feature stores destination device's EDID information onto DIGI-VGASD2-S
  • Can pass resolutions up to 1920x1200 and 20 Hz to 20 kHz audio up to 350 feet
  • IR and RS232 extension up to 350 feet, bi-directional IR on output 1 only
  • Transmitter only - DIGI-VGASD2-R required


 VGA2-DA4

VGA Distribution Amp - 1 Input x 4 Output

 

  •  Supports resolutions up to 2560x1600
  • High fidelity 20 Hz to 20 kHz audio
  • Supports DDC, DDC2, DDC2B (output 1 only)
  • Amplifiers may be cascaded (signal degradation will occur if there are too many links from the first DA)




BACK